Click on the image to check the artwork
Lh-zd series type D waterpower pulp machine (with hinge rope machine) series D hydrapulper lh-zd by (ragger) adopted Carry "D" form tub and off center position of the rotor, energy-saving v cox waste paper and rotor contact more quickly, frequency, greatly shorten the higher pulper time, without any increase in power and volume increase production capacity. The rotor and pulp out above the tub pulp dish plane, in the rotor forms around a low pressure flow area, make broken in the process of the impurities slag mouth into a heavier bulky Wells, and reuse of sediment discharge grab regularly. Type D waterpower pulp machine general use of the chain conveyor feeding, and equipped with hinge rope machine, to remove plastic bags, rope head, such as sexual impurity, wire winding recommended hinge rope maxhine for ZJS1 as shown in figure. For maximum reduce fiber loss, generally with impurity of sediment that contained in the well separator impurities of the thick liquid material processing, the recovery is pulp.
Main specifications and parameters:
1,Type:ZD5, ZDl0 ,ZDl5 ,ZD20 ,ZD25 ,ZD30 ,ZD40
The nominal volumem3 :5,10 ,15 ,20 ,25 ,30 and 40
Pulper concentration % :3-5
The production ability t/d: 25 -40 ,60-80, 80-120,140-180,180-230,230-280,300-370
Sieve hole specifications mm:10-phi-phi 24
Motor model: Y315M-6 Y315M-6 Y355M1-6 Y255M2-6 Y355L1-6 Y400-8 Y355-4
weight equipment :5600,6200,8920,11000 ,13000 ,19500, 25500
Type D waterpower pulp machine